Green Slimer
 

Lighting & Flow Requirements:
Bali Green Slimer requires moderate to high water flow and bright lighting (PAR 300-450) to maintain its color. T5's, Metal Halides, or LED's can all grow acropora when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration.

Water Chemistry:
It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.

Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.

Placement:
Mount the Bali Green Slimer using IC gel glue, or putty, on an exposed rock or ledge in the aquarium where it will receive direct flow and light. Remember this coral can grow big over time so place it near the halfway up in your aquarium to give it room to grow and branch out. Adding some Red Montipora Capricornus around it once its established can create a nice contrast.

luckyink
luckyink updated Green Slimer
2014-07-17 09:27:33 -0400
Lighting & Flow Requirements: Bali Green Slimer requires moderate to high water flow and bright lighting (PAR 300-450) to maintain its color. T5's, Metal Halides, or LED's can all grow acropora when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration. Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
luckyink
luckyink posted on Green Slimer
2014-07-17 09:27:32 -0400
luckyink
luckyink created Green Slimer on Green Slimer
2014-07-17 09:26:25 -0400
Lighting & Flow Requirements: Bali Green Slimer requires moderate to high water flow and bright lighting (PAR 300-450) to maintain its color. T5's, Metal Halides, or LED's can all grow acropora when the proper PAR levels are provided. We recommend a 14-20K color spectrum for best coloration. Water Chemistry: It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.

Coral Specs

Scientific Name
Environment
Salt
Difficulty
Moderate
Reef Safe
Yes

Tanks (1)

Lucky's 150g Mixed Reef - Salt water Aquarium